Understand what quality means
At ebm-papst, we pride ourselves on providing our customers with high quality, reliable products. We stand by our products, confident in their state of the art production and high quality. Located in Australia, with offices in Melbourne and Sydney, we are able to quickly provide on the ground support, if required.
This involves the monitoring and checking mechanisms which are a part of the production process for all ebm-papst products. All components of the AgriCool shed ventilation system, including tunnel fans and de-stratification fans, undergo testing in accordance with the standards set by the International Organisation for Standardisation (ISO).
It is with this process that we at ebm-papst can give you the confidence each AgriCool product is designed for reduced noise levels and energy consumption, while providing the poultry farmer with assurance of complete speed control of the poultry ventilation fans installed.
This involves the monitoring and checking mechanisms which are a part of the production process for all ebm-papst products. All components of the AgriCool shed ventilation system, including tunnel fans and de-stratification fans, undergo testing in accordance with the standards set by the International Organisation for Standardisation (ISO).
It is with this process that we at ebm-papst can give you the confidence each AgriCool product is designed for reduced noise levels and energy consumption, while providing the poultry farmer with assurance of complete speed control of the poultry ventilation fans installed.
Precision measurement
To ensure consistently precise, reproducible measurements, the test facilities and test equipment are subjected to regular checking with a measurement instrument accuracy of ± 0.5% of the measured value.
Measurements are taken on third-party certified precision chamber test rigs. Constant internal monitoring of the test facilities used and the values obtained guarantees consistently high levels of product quality and fan dependability.
Measurements are taken on third-party certified precision chamber test rigs. Constant internal monitoring of the test facilities used and the values obtained guarantees consistently high levels of product quality and fan dependability.
Measurement over calculation
Rather than give our customers high expectations based on theoretical calculations, ebm-papst constructs each fan arrangement and then tests the whole module. This allows for accuracy of energy consumption results and realistic expected airflow outputs.
Consequently every fan supplied for use as a AgriCool system component can always be trusted to deliver the performance required. Every fan supplied by ebm-papst is 100% end-of-line tested before leaving our factory.
Consequently every fan supplied for use as a AgriCool system component can always be trusted to deliver the performance required. Every fan supplied by ebm-papst is 100% end-of-line tested before leaving our factory.
Testing standards
All fan data presented by ebm-papst has been attained at state-of-the-art facilities which are calibrated and installed to international standards (ISO 5801, installation category A and ISO 13347). Aeroacoustic fan testing is used to gain a simultaneous recording of air performance data and noise values. For detailed information on the measurement set-up, please contact ebm-papst A&NZ.
AgriCool product range test results
200mm destratification fan characteristic fan curve
|
500mm stirring fan characteristic fan curve
|
1250mm tunnel fan characteristic fan curve
|
|
200mm Destratification fan
Measurement: T357 & T359 |
500mm Stirring fan
Measurement: T358 |
1250mm Tunnel fan
Measurement: T416 & T417 Conducted on the complete assembly including housing, guards and shutter. |
The values given above were taken under the measuring conditions (ISO 5801, installation category A and ISO 13347) and may vary according to the actual installation situation. Any deviation from the standard set-up, the specific values have to be checked and reviewed with the unit installed.